QIDI Q3D Technical Specifications
|
Print Size (W*D*H):Main Nozzle: 260*260*260 mm³ |
Printer Dimensions:405*475*441 mm |
|
Package Dimensions:500*540*580 mm |
Gross Weight:35 kg |
| Net Weight:29 kg | Print Head Temperature:≤ 350℃ |
|
Printing Plate:Double-sided PEI Magnetic Build Plate |
Hot Bed Temperature:≤ 120℃ |
|
Max Speed of Tool Head:600mm/s |
Acceleration:≤20000mm/s^2 |
| XY Structure:CoreXY, 7mm Width 1.5GT Belt | X Axis:High Hardness Linear Guide Rail |
| Z Axis:10mm Linear Shafts and Screws |
Printing Platform:Aluminum Plate Silicone Heated Bed Status RGB LED |
| Nozzle:Quick-Swap Bimetal Nozzle | Nozzle Diameter:0.4mm (0.2/0.6/0.8mm Optional) |
|
Extruder:Direct Extruder, Hardened Steel Dual Gears, Extruder Thermal Monitor (ETM) |
Supported Filament (Main Hotend):PLA, ABS, ASA, PETG, TPU, PA, PC, Carbon/Glass Fiber Reinforced Polymer, etc. |
| Filament Diameter:1.75mm | Multi-Color Printing:Compatible with QIDI Box (Multi-color) |
|
Air filter:3-in-1 Air Filter: G3 Pre-Filter + H12 HEPA + Coconut Shell Activated Carbon |
Chamber Temperature:Gen-4 Up to 70°C, Independent Chamber Heating |
| Automatic Leveling:Eddy Sensor Integrated into the Hotend | Filament Detection:Run Out Sensor, and Tangle Detection (QIDI BOX required) |
| AI Camera Detection:Yes | Auxiliary Part Cooling Fan:4-Pin PWM Fan with RPM Feedback |
| Hot End Cooling Fan:4-Pin PWM Fan with RPM Feedback | Model Cooling Fan:4-Pin PWM Fan with RPM Feedback |
| Power Loss Recovery:Yes | Input Shaping:Yes |
| Voltage:110V / 220–240V AC, 50/60Hz (region-specific models available) |
Rated Power:220 VAC: 1200W+280W (Chamber Heating) 110 VAC: 300W+280W (Chamber Heating) Steady-State Power (25°C Ambient): PLA: 190W, ABS: 500W |
|
Camera:HD Camera, Timelapse Supported |
Storage:64G EMMC and USB2.0 Flash Drive |
| Connectivity:Wi-Fi, USB | Display Screen:4Inch 800*480 Touch Screen |
| Slicer:QIDI Studio and other third-party software, such as PrusaSlicer, Orca etc. (certain advanced features may not be supported) | File Formats for Slicing:STL, OBJ, 3MF, STEP (.stp/.step), etc. |
QIDI Q3D TDS
Download
Tips:
- For better print quality, please use the QIDI official filaments.
- The printer’s voltage specifications vary by sales region. Before use, please check the label next to the power socket on the printer to ensure the supplied voltage matches the indicated voltage.
- To ensure the heatbed quickly reaches the needed temperature, the printer will maintain maximum power for about 3-5 minutes.
- Special area: Lower-left 5×17 mm area and Lower-Right 11×17 mm area are non-printable by default. Remove cutter for full-plate printing.
Q2
Plus 4
QIDI Box
Q1 Pro
X-Max 3