Q2
Plus 4
QIDI Box
Q1 Pro
X-Max 3
Select the filaments you want to compare
Selected:
All filaments
ABS-GF25
Shop now >
ABS Rapido
Shop now >
ABS Rapido Metal
Shop now >
ASA
Shop now >
ASA-Aero
Shop now >
ASA-CF20 Core
Shop now >
Odorless ABS
Shop now >
PA12-CF
Shop now >
PAHT-CF
Shop now >
PAHT-GF
Shop now >
PC-ABS-FR
Shop now >
PEBA 95A
Shop now >
PET-CF17
Shop now >
PET-GF
Shop now >
PETG Basic
Shop now >
PETG-CF
Shop now >
PETG-GF
Shop now >
PETG Rapido
Shop now >
PETG-Tough
Shop now >
PETG Translucent
Shop now >
PLA Basic
Shop now >
PLA-CF
Shop now >
PLA Matte Rapido
Shop now >
PLA Matte Basic
Shop now >
PLA Rapido
Shop now >
PLA Metal
Shop now >
PLA Silk
Shop now >
PLA-Wood
Shop now >
PPS-CF
Shop now >
PPS-GF20
Shop now >
S-White
Shop now >
TPU-Aero
Shop now >
TPU-GF
Shop now >
TPU95A-HF
Shop now >
Ultra PA-CF25
Shop now >
UltraPA
Shop now >
Filament Properties
Strength
Resistance to bending before failure. A higher value means the material withstands a greater bending load.
Bending Strength - XY
—
—
—
—
Stiffness
Resistance to deformation under load. A higher value means the printed part flexes less.
Bending Modulus - XY
—
—
—
—
Layer Adhesion
Strength of the bond between printed layers in the Z direction. A higher value indicates stronger layer bonding.
Tensile Strength - Z
—
—
—
—
—
—
—
—
—
—
—
Heat Resistance
Heat deflection temperature under a 0.45 MPa load. A higher value indicates better shape retention under heat and load.
HDT, 0.45 MPa
—
—
—
—
Water Absorption
Moisture absorbed at saturation. A lower value is generally better for dimensional stability and consistent printing.
Saturated Water Absorption Rate
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Pre-printing Preparation
Dry Out Before Use
Is drying highly recommended?
Required
Optional
Optional
Optional
Optional
Required
Optional
Required
Required
Required
Required
Required
Required
Required
Optional
Required
Required
Optional
Optional
Optional
Optional
Required
Optional
Optional
Optional
Optional
Optional
Optional
Required
Required
Required
Required
Required
Required
Required
Required
Drying Condition
Oven temperature & time
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 70-80°C / 6-8 h
Blast Drying Oven: 80°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 80°C / 4-6 h
Blast Drying Oven: 60°C / 4-6 h
Blast Drying Oven: 100°C / 10 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 60-65°C / 4-6 h
Blast Drying Oven: 70°C / 4-6 h
Blast Drying Oven: 70°C / 4-6 h
Blast Drying Oven: 60-65°C / 4-6 h
Blast Drying Oven: 60-65°C / 6-8 h
Blast Drying Oven: 60-65°C / 4-6 h
Blast Drying Oven: 50°C / 4-8 h
Blast Drying Oven: 50°C / 4-6 h
Blast Drying Oven: 50-55°C / 4-6 h
Blast Drying Oven: 50-60°C / 4-6 h
Blast Drying Oven: 50-55°C / 4-6 h
Blast Drying Oven: 45-50°C / 4-6 h
Blast Drying Oven: 45-50°C / 4-6 h
Blast Drying Oven: 50-55°C / 4-6 h
Blast Drying Oven: 100°C / 10 h
Blast Drying Oven: 100°C / 10 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 60°C / 4-6 h
Blast Drying Oven: 70-80°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
Blast Drying Oven: 80-100°C / 4-6 h
BOX Compatibility
QIDI BOX Companion
Nozzle Size/Material
Recommended hardware settings
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
0.4–0.8 mm / Hardened steel nozzle or harder
0.2-0.8 mm / All Material
Build Plate
Bed Temperature & Type
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate (80-110°C) / Smooth PEI plate with glue (80-110°C)
Textured PEI plate (80-110°C) / Smooth PEI plate with glue (80-110°C)
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate (90-110°C) / Smooth PEI plate with glue (90-110°C)
Textured PEI plate with PVP glue (40-70°C) / Smooth PEI plate with PVP glue (40-70°C)
Textured PEI plate with PVP glue (70-90°C) / Smooth PEI plate with PVP glue (70-90°C)
Textured PEI plate with PVP glue (70-90°C) / Smooth PEI plate with PVP glue (70-90°C)
Textured PEI plate (100-110°C) / Smooth PEI or PC plate with glue (100-110°C)
Textured PEI plate (60-100°C) / Smooth PEI plate with release glue (60-100°C)
Textured PEI plate with PVP glue (70-80°C) / Smooth PEI plate with PVP glue (70-80°C)
Textured PEI plate with PVP glue (60-80°C) / Smooth PEI plate with PVP glue (60-80°C)
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C)
Textured PEI plate (70-80°C) / Smooth PEI plate with release glue (70-80°C) / Cool Plate（60-80℃）
Textured PEI plate (50-60°C) / Smooth PEI plate with glue (50-60°C) / Cool Plate (35-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (50-60°C) / Smooth PEI plate with glue (50-60°C) / Cool Plate (35-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate (45-60°C) / Smooth PEI plate with glue (45-60°C) / Cool Plate (30-45°C)
Textured PEI plate with PVP glue (100-110°C) / Smooth PEI plate with PVP glue (100-110°C)
Textured PEI plate with PVP glue (80-90°C) / Smooth PEI plate with PVP glue (80-90°C)
Textured PEI plate with PVP glue (60-80°C) / Smooth PEI plate with PVP glue (60-80°C)
Textured PEI plate (30-45°C) / Smooth PEI plate with release glue (30-45°C)
Textured PEI plate (35-50°C) / Smooth PEI plate with release glue (35-50°C)
Textured PEI plate (35-50°C) / Smooth PEI plate with release glue (35-50°C)
Textured PEI plate with PVP glue (70-80°C) / Smooth PEI plate with PVP glue (70-80°C)
Textured PEI plate with PVP glue (70-80°C) / Smooth PEI plate with PVP glue (70-80°C)
Printer Settings
Print with Enclosure
Requires closed chamber?
Seal with Desiccant
Storage requirement
Print Speed
Recommended speed range
30-120 mm/s
40-80 mm/s
40-80 mm/s
30-120 mm/s
30-90 mm/s
30-250 mm/s
30-120 mm/s
30-120 mm/s
30-120 mm/s
30-120 mm/s
30-300 mm/s
30-120 mm/s
Up to 300 mm/s
30-120 mm/s
30-50 mm/s
40-150 mm/s
<=150 mm/s
<=300 mm/s
30-300 mm/s
30-50 mm/s
30-50 mm/s
100-200 mm/s
40-80 mm/s
30-50 mm/s
<=300 mm/s
40-80 mm/s
40-80 mm/s
40-80 mm/s
30-60 mm/s
Up to 250 mm/s
30-120 mm/s
<100 mm/s
30-120 mm/s
30-120 mm/s
30-120 mm/s
30-120 mm/s
Nozzle Temperature
Extruder heat range
250-270°C
220-250°C
220-250°C
240-260°C
240-280°C
250-280°C
240-260°C
280-300°C
300-320°C
300-320°C
240-270°C
230-260°C
270-300°C
280-320°C
240-260°C
240-270°C
250-275°C
235-275°C
230-260°C
240-260°C
210-230°C
210-240°C
210-230°C
210-230°C
200-240°C
190-220°C
210-230°C
190-220°C
310-350°C
310-350°C
260-280°C
230-270°C
240-270°C
210-230°C
300-340°C
260-280°C
Part Cooling Fan
Cooling fan ratio
0-50%
0-80%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
50-100%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
0-50%
50-100%
0-50%
50-100%
50-100%
50-100%
50-100%
50-100%
50-100%
0-50%
0-50%
0-50%
50-100%
50-100%
50-100%
0-50%
0-50%
Post-printing Processes
Annealing
Post-cure processing
Not generally recommended
Not generally recommended
Not generally recommended
Not generally recommended
Not recommended; may collapse foamed structure
Not generally recommended
Not generally recommended
100°C / 8 h
80-100°C / 4-8 h
100°C / 8 h
90°C / 4 h (optional stress relief; support parts)
Not recommended
120°C / 10 h
100°C / 8 h
Not generally recommended
80-90°C / 2-4 h (optional; support parts)
80-90°C / 2-4 h (optional; support parts)
Not generally recommended
Not generally recommended
Not generally recommended; transparency may change
50-60°C / 6-12 h (optional; support parts to limit warping)
70-80°C / 4-6 h (optional; support parts to limit warping)
60-70°C / 2-4 h (optional; support parts to limit warping)
60-70°C / 2-4 h (optional; support parts to limit warping)
60-70°C / 2-4 h (optional; support parts to limit warping)
60-70°C / 2-4 h (optional; support parts to limit warping)
Not generally recommended; surface finish may change
Not generally recommended; wood-filled parts may discolor
130°C / 10 h
130°C / 10 h
Not applicable (support material)
Not recommended; may collapse foamed structure
Not recommended
Not recommended
100°C / 8 h
80-100°C / 4-8 h (optional; support parts)
TDS Documents
Technical Data Sheet
View or download the product TDS