MakeBuddy Smart5 Technical Specifications

Printing Technology Fused Deposition Modeling (FDM)

Print Size (W*D*H) 180*180*180 mm

Printer Dimensions 322*344*410 mm

Package Dimensions 400*380*455 mm
Net Weight 10kg Gross Weight 14.5kg

XY Structure CoreXY

 X Axis 8mm High Hardness Linear Hollow Steel Shafts
Y Axis 8mm High Hardness Linear Hollow Steel Shafts Z Axis Single Z-axis Motor + Timing Belt, 8mm Linear Shafts and Screws
Shell Plastic Chassis Plastic + Steel
Motor 42-48 High-Speed Motor Max Speed of Tool Head 600mm/s
Acceleration ≤20000mm/s^2

Print Head Temperature ≤ 300℃

Hot Bed Temperature ≤ 80℃

Printing Platform Aluminum Substrate Heating Bed

Printing Plate Double-sided Cool Plate Pro

Hotend Ceramic Plate Heating, Quick Swap Hotend
Only Need 40s Heating from 30℃ to 220℃

Temperature Measurement Unit Thermocouple

Extruder Gear Hardened Steel Single Gears
Transmission Ratio 6.3:1
Nozzle Diameter 0.4mm （0.2/0.6/0.8mm Optional） Filament Cutter Yes
Filament Diameter 1.75mm

Supported Filament PLA, PETG, etc.

Air Filter HEPA Filter + Coconut Shell Activated Carbon + Breathable Mesh Fabric

Hot End Cooling Fan 4-Pin PWM Fan with RPM Feedback

Model Cooling Fan 4-Pin PWM Fan with RPM Feedback

 Motherboard Fan Voltage-controlled Fan
Chamber Circulation Fan Voltage-controlled Fan Filament Detection Run Out Sensor (mounted above extruder), and Tangle Detection (QIDI BOX required)
Automatic Leveling Hands-free Automatic Leveling（Loadcell Sensor Integrated into the Hotend） Timelapse Yes (Built-in Camera)
Input Shaping Yes Power Loss Recovery： Yes
Voltage 110V / 220–240V AC, 50/60Hz (region-specific models available) Rated Power 115V:150W / 220V:150W
Camera Camera (Up to 1080P) Display Screen 4 Inch 800*480 Touch Screen
Storage 32G EMMC and USB2.0 Flash Drive Connectivity Wi-Fi (2.4GHz/5GHz), USB
Stepper Motor Driver Cortex-M7 based Current-Loop Stepper Servo Control Control Interface Touch Screen, Mobile APP, PC Application
Slicer QIDI Studio and other third-party software, such as Orca, PrusaSlicer etc. File Formats for Slicing STL, OBJ, 3MF, STEP (.stp/.step), etc.
Operating System Windows, MacOS, Linux Seal Print Compatible

MakeBuddy Smart5 TDS

Download
Tips:
  • For better print quality, please use the QIDI official filaments.
  • The printer’s voltage specifications vary by sales region. Before use, please check the label next to the power socket on the printer to ensure the supplied voltage matches the indicated voltage.
  • To ensure the heatbed quickly reaches the needed temperature, the printer will maintain maximum power for about 3-5 minutes.
  • Special area: Lower-right 11×22 mm area is non-printable by default. Remove cutter for full-plate printing.