{"title":"Sale-Filaments","description":"","products":[{"product_id":"pet-cf-filament","title":"PET-CF Filament","description":"\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eQIDI PET-CF 3D Printer Filament\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI PET-CF is specially developed for FDM 3D printing process. Its substrate material is PET engineering plastic with low moisture absorption, high strength, creep resistance, excellent chemical resistance and high heat resistance. With good dimensional stability, no warpage and no shrinkage and no smell, no heating chamber is required during the printing process. It can be used with QIDI S-White Support Material to solve the problem of poor molding effect on supporting surfaces of complex models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_01.jpg?v=1715224682\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_01.jpg?v=1715067296\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_02.jpg?v=1715224679\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_02.jpg?v=1715067296\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch3 style=\"margin-top: 30px;\" class=\"qdp_t qdp_st\"\u003eSmooth High-speed Printing\u003c\/h3\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI PET-CF Filaments prints out models with great gloss and beautiful texture.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/bb8742bdc7b44a7086f2d32dc32cc551.mp4\" autoplay=\"autoplay\" controls=\"controls\" loop=\"loop\" muted=\"\" poster=\"PET-CF-2.png\" playsinline=\"\"\u003e\u003c\/video\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv style=\"padding: 0;\" class=\"qdp_t-icpc\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\n\u003c!-- 第一条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_03.jpg?v=1715224680\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_03.jpg?v=1715067296\" class=\"qdp_i\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eSmart Fiber Reinforced Technology\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI Smart Fiber Reinforcement Technology significantly improves the mechanical properties and heat resistance of the material and releases internal stresses through the fiber mesh structure during the printing process, resulting in good dimensional stability of the printed part without warping.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_04.jpg?v=1715224678\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_05.jpg?v=1715067296\" class=\"qdp_i\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eLow Creep\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eThe molecular chain structure of PET is highly regular and has a rigid benzene ring structure, so that PET has better mechanical properties and less deformation under long-term load. Compared with PA and PC materials, PET has better creep-resistance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv style=\"padding: 0;\" class=\"qdp_t-icpc\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\n\u003c!-- 第一条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_05.jpg?v=1715224680\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PET-CF06\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_06.jpg?v=1715067296\" class=\"qdp_i\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eHigh Mechanical Strength\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003ePET filament carbon fiber has higher strength and rigidity, Better impact Resistance,and Wear Resistance than regular PETG material.Suitable for applications requiring torsional, tensile, and impact strength.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_06.jpg?v=1715224678\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PET-CF07\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_07.jpg?v=1715067296\" class=\"qdp_i\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eLow Moisture Absorption\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI PET-CF has the characteristics of low moisture absorption, and the moisture absorption of this carbon fiber reinforced PET is only 0.5%.Moisture has no effect on the mechanical properties and dimensional stability of QIDI PET-CF.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- table布局 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eAccessory Compatibility\u003c\/h3\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003c!-- 第一行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eQIDI PEI Plate, HF Plate and Smooth Plate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003ePC Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eHardened Steel Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003cbr\u003eBimetal Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eBrass\/Copper plated Nozzle (0.2\/0.4\/0.6\/0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c!-- 第四行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003eGlue Stick\/ 3D LAC adhesive spray\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局结束 --\u003e \u003c!-- table-row --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e100 °C，4-8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 15% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e280 - 320 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e40-200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003ePhysical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.3 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e148.8 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e86.7 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e251 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e6.8 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e72.51±1.39 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e2.49±0.22 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e5345.71±231.24 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e114.47±1.89 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e7.75±1.08 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"qdp_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\"\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eDownloads\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv style=\"justify-content: center;\" class=\"qdp_p qdp_i-t-text qdp_padding-in-mobile qdp_flex-pc\"\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI pet-CF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1YsV_yx9Gv-tBJf5bntW6aOF3FkJMrlgo\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament TDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI pet-CF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1g46kr0ISNWbyvv6qKpglv303Lba02c-m\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament MSDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t qdp_st\"\u003ePrinting Tips\u003c\/h2\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: left;\"\u003e• Although the moisture absorption of PET material is very low, it is very sensitive to moisture. Printing after absorbing moisture will result in oozing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PET-CF vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage. \u003cbr\u003e• After the printing, the printed part can be annealed to further improve the strength of QIDI PET-CF print part. Annealing conditions: place the printed part at 80-100°C for 4-8 hours and cool to room temperature naturally.\u003cbr\u003eFor more details please refer to: \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff;\" href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" title=\"Filament drying cover\" target=\"_blank\"\u003e Filament Guide\u003c\/a\u003e\u003c\/span\u003e on WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003c!-- 第一部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eVacuum Aluminum Foil Packaging\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eAccording to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_07.jpg?v=1715224683\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_08.jpg?v=1715067296\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\"\u003eProduct Size\u003c\/h2\u003e\n\u003cp class=\"qdp_p\"\u003eQIDI TECH PET-CF filament 1.75mm works perfectly with most FDM 3D printers on the market.\u003c\/p\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_10.jpg?v=1715067296\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_09.jpg?v=1715130237\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv style=\"padding: 0;\" class=\"qdp_t-icpc\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\u003c!-- 第一条 --\u003e\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_11.jpg?v=1715067296\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg alt=\"PET-CF\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_10_732a716f-46c6-40f4-b6f0-b3c0b84e57da.jpg?v=1715674034\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Qidi Tech","offers":[{"title":"PET-CF","offer_id":51783479656764,"sku":"PET-CF","price":41.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/9650\/7708\/files\/PET-CF_2_981f5ee3-520d-4a08-90fd-4e3a861c8243.jpg?v=1749152289"},{"product_id":"pet-gf-filament","title":"PET-GF Filament","description":"\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eQIDI PET-GF 3D Printer Filament\n\u003ch4 style=\"text-align: center;\" class=\"qdp_p\"\u003ePET-GF is specially developed for FDM 3D printing process. The substrate is made of PET engineering material, which has the characteristics of low moisture absorption, high strength, creep resistance, solvent resistance and high heat resistance. It has good dimensional stability during printing, no warping, no shrinkage, no odor, and no need for environmental insulation.\u003c\/h4\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/01_62244f85-0c4f-48df-80de-2a491e84d0d5.png?v=1741933399\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/1_0876b608-f982-40f3-b5d4-6bd12fb1fddd.jpg?v=1741933343\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eSay goodbye to warping\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eThe molecular chain structure of PET is highly regular and has a rigid ring structure, which makes PET have good mechanical properties, small deformation under long-term load, and better creep resistance than PA and PC materials.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/02_9db81119-23ef-41c7-85eb-14a57899b0ea.png?v=1741933412\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/2_e1517e9d-c658-4c60-aa91-4c07377a2893.jpg?v=1741933364\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003ePET-GF prints are suitable for special environments\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003ePET-GF further enhances the rigidity, hardness and wear resistance of the material by adding chopped glass fibers. At the same time, glass fibers can inhibit the warping behavior of PET during printing, so that PET-GF only needs 70-80℃ base plate heating when printing, and does not require cavity insulation, making it very easy to print. Its 3D printed parts are suitable for use environments that require high heat resistance and long-term stress, such as 3D printer hot end parts.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/03_3e508b95-c18d-49b9-9c46-4c18cd597fd9.png?v=1741933424\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/5282\/7532\/files\/3_b5c2c32c-e879-4292-88ce-4c5457305625.jpg?v=1741933380\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003cbr\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eAccessory Compatibility\u003c\/h3\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003cbr\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ctable style=\"width: 99.9582%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 20%;\" class=\"qdp_td\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003c!-- 第一行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd style=\"width: 20%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\" class=\"qdp_td\"\u003eQIDI PEI Plate, HF Plate and Smooth Plate\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\" class=\"qdp_td\"\u003ePC Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd style=\"width: 20%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\" class=\"qdp_td\"\u003eHardened Steel Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm),Bimetal Nozzle ( 0.4 \/ 0.6 \/ 0.8 mm),Tungsten Carbide Nozzles( 0.4 \/ 0.6 \/ 0.8 mm)\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\" class=\"qdp_td\"\u003eBrass\/Copper plated Nozzle (0.2\/0.4\/0.6\/0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c!-- 第四行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd style=\"width: 20%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\" class=\"qdp_td\"\u003eGlue Stick\/ 3D LAC adhesive spray\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\" class=\"qdp_td\"\u003e\/\u003c\/td\u003e\n\u003c!-- table布局 --\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable style=\"width: 99.9582%;\" class=\"qdp_tb\"\u003e\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局结束 --\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- table-row --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\u003c\/table\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e100-120 °C, 4-8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting and Keeping Container’s Humidity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 15% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e260 - 320 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e30-200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003ePhysical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.38 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e148.8 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e86.7 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e251 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e5.3 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eUnannealed\/Annealed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e64.65±3.12 MPa\/70.86±2.86 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.14±0.11 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e3201.0±57.42 MPa\/3650.32±65.81 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e98.62±0.84 MPa\/114.87±3.0 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e12.68±1.61 kJ\/m²\/6.56±0.68 kJ\/m³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003ePrinting Tips\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Suggestions\u003c\/strong\u003e\u003cbr\u003e1. Although the moisture absorption of PET material is very low, it is very sensitive to moisture. Printing after absorbing moisture will result in oozing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PET-GF vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage. \u003cbr\u003e2. After the material is damp, there will be more printing oozing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 100-120℃ for 4-6h to restore the printing quality of QIDI PET-GF.\u003cbr\u003e3. Hardened steel and above grade nozzles shall be selected, which can effectively improve the print quality. Besides, it is recommended that the thickness of the heating block should no less than 12mm. \u003cbr\u003e4. After the printing, the printed part can be annealed to further improve the strength of QIDI PET-GF print part. Annealing conditions: place the printed part at 80-100℃ for 4-8 hours and cool to room temperature naturally.\u003cbr\u003e5.The filament has a high content of short-cut glass fiber and has been factory-dried, which makes it more brittle and prone to breaking. This is a normal phenomenon.\u003c\/p\u003e\n\u003ch3\u003eArrival time\u003c\/h3\u003e\n\u003cp\u003eExpected to be in stock in \u003cstrong\u003elocal warehouses\u003c\/strong\u003e in \u003cstrong\u003e1-2 months\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIf you want to get it before then, you can choose to buy it from China, but you should also handle the customs clearance for shipments from China on your own.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eDownloads\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"justify-content: center;\" class=\"qdp_p qdp_i-t-text qdp_padding-in-mobile qdp_flex-pc\"\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI PET-GF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1YsV_yx9Gv-tBJf5bntW6aOF3FkJMrlgo\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament TDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI PET-GF\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1g46kr0ISNWbyvv6qKpglv303Lba02c-m\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament MSDS\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"QIDI Tech","offers":[{"title":"BLACK HEX Code #212322","offer_id":51783491944764,"sku":"PET-GFBLK","price":37.99,"currency_code":"AUD","in_stock":true},{"title":"BROWN HEX Code #946037","offer_id":51783491977532,"sku":"PET-GFBRO","price":37.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/9650\/7708\/files\/PET-GF_black_19ea5a71-7ed6-4e0c-af74-51641b60dfac.png?v=1749152290"},{"product_id":"basic-filament-mystery-box","title":"Basic filament mystery box","description":"\u003ch3\u003e\u003cstrong\u003eUnlock the Mystery: 3D Printing Filament Discovery Box\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003eEvery unboxing is an unknown journey of creation! Our 3D Printing Filament Discovery Box is designed to provide you with an unprecedented materials experience and a spark of creative inspiration.\u003c\/p\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003e🎯 Unbeatable Surprise Pricing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003eSingle Box Trial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFor just\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e$24.99\u003c\/strong\u003e, receive one random spool of high-quality filament.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003eBulk Discount - Buy 5, Get 1 FREE!\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePay for 5 boxes (\u003cstrong\u003e$124.95\u003c\/strong\u003e) and you will receive\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e6 full spools\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof mystery filament, ensuring non-stop printing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003e🔮 The treasure trove of filaments you may discover includes, but is not limited to:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"4,0,0\"\u003eEssential High-Speed Filaments:\u003c\/b\u003e The ultra-smooth \u003cb data-index-in-node=\"49\" data-path-to-node=\"4,0,0\"\u003ePLA Rapido\u003c\/b\u003e for lightning-fast printing, and the professional-finish \u003cb data-index-in-node=\"117\" data-path-to-node=\"4,0,0\"\u003ePLA Matte Rapido\u003c\/b\u003e for elegant, non-reflective surfaces—both engineered for maximum efficiency without sacrificing quality.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecialty \u0026amp; Functional Filaments:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe extraordinary textured\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePLA Wood\u003c\/strong\u003e, the iridescent and shiny\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePLA Silk\u003c\/strong\u003e, the strong and wear-resistant\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePLA-CF (Carbon Fiber Reinforced)\u003c\/strong\u003e, and the premium\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePLA Metal\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003eHigh-Performance Filaments:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe flexible and impact-resistant\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTPU\u003c\/strong\u003e, the safer printing\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOdorless-ABS\u003c\/strong\u003e, the robust\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eABS Metal\u003c\/strong\u003e, and the weather-resistant\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eASA\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003eProfessional Grade Treasures (For the Lucky Ones!):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA chance to unlock extremely professional materials like\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePET-GF (Glass Fiber Reinforced)\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePC\/ABS-FR (Flame Retardant)\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eASA-AERO (Aerospace Grade ASA)\u003c\/strong\u003e, and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eABS-GF25 (25% Glass Fiber ABS)\u003c\/strong\u003e!\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll filaments were priced higher than the mystery box.\u003c\/strong\u003e（Note: Value comparison is based on the average MSRP of the series; specific spool values may vary.）\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"4,0\"\u003ePromo Rules:\u003c\/b\u003e Not valid in combination with other \u003cb data-index-in-node=\"49\" data-path-to-node=\"4,0\"\u003egift-on-purchase\u003c\/b\u003e offers.\u003c\/p\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003eWhether you're an enthusiast looking to experiment with new materials or a professional seeking specialized filament solutions, this blind box is your perfect choice. Embrace the unknown—your next box could contain the top-tier filament you've been dreaming of!\u003c\/p\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003eOrder now and unlock your exclusive printing treasure!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Qidi Tech Online Store","offers":[{"title":"1 pc","offer_id":51783496466748,"sku":"Basic filament mystery box*1","price":22.99,"currency_code":"AUD","in_stock":true},{"title":"6 pcs","offer_id":52045125321020,"sku":"Basic filament mystery box*6","price":114.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/9650\/7708\/files\/qidi-tech-easter-mystery-box-basic-filament-5-plus-1_jpg.png?v=1775194515"},{"product_id":"tpu-aero","title":"TPU-Aero Filament","description":"\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eQIDI TPU-Aero\n\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eTPU-Aero is a medium-hard, reactive foaming flexible material developed specifically for FFF printing technology. By controlling the printing temperature, different foaming ratios can be achieved, thereby achieving different weight and hardness effects. Combined with excellent elasticity, wear resistance and lightweight properties, it can be used in sports equipment, industrial parts, aerospace prototypes and creative design.\u003c\/p\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/01.png?v=1748061323\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/1_3e4c0b9f-7356-4265-ae65-c670e5e324f5.png?v=1747811830\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eLightweight and excellent interlayer adhesion\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eTPU-Aero is more than 50% lighter than traditional TPU materials, has excellent interlayer adhesion, and the weight of the material can be controlled by adjusting the printing temperature. It is particularly suitable for weight-sensitive application scenarios such as sports equipment, aerospace, etc.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/02_cc1304f1-fcfc-489a-9ed1-53d0aa04acaa.png?v=1748061323\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/2_5dc9dad7-d0c1-44c0-949b-b86a0c606586.png?v=1747811827\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eAdjustable weight and hardness\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eBy adjusting the temperature, flow ratio or filling density, the hardness can be precisely controlled from 85A to 65A to achieve interesting different printing effects.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/03_bac80a3f-1e69-4fb4-b4a7-16832378c8f5.png?v=1748061323\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/3_7e7e3175-a41f-4beb-814a-f2318842d000.png?v=1747811830\" class=\"qdp_i\"\u003e \u003c!-- 第二张图片 --\u003e \u003c!-- 手机端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/04.png?v=1748061322\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/4_89b4f6bb-6339-4415-a467-9e4242aed431.png?v=1747811827\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eHigh resilience, high toughness\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eTPU-Aero has excellent deformation recovery ability, which is suitable for parts that need to be deformed repeatedly. It has strong tear and impact resistance and is not easy to break under extreme stress.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; justify-content: space-between; align-items: center; gap: 20px; padding: 20px; max-width: 1200px; margin: 0 auto;\"\u003e\n\u003c!-- 动态图片 1 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/TPU-Aero1.gif?v=1747966322\" alt=\"TPU-Aero1.gif\" style=\"width: 48%; border-radius: 8px; box-shadow: 0 4px 8px rgba(0, 0, 0, 0.1); height: auto;\" class=\"qdp_i\"\u003e \u003c!-- 动态图片 2 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/TPU-Aero2.gif?v=1747966327\" alt=\"TPU-Aero2.gif\" style=\"width: 48%; border-radius: 8px; box-shadow: 0 4px 8px rgba(0, 0, 0, 0.1); height: auto;\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c!-- 手机端两张动态图片1 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/TPU-Aero1.gif?v=1747966322\" class=\"qdp_mi\"\u003e \u003c!-- 手机端两张动态图片2 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/TPU-Aero2.gif?v=1747966327\" class=\"qdp_mi\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 标题加文案加大图部分 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eMatte Finish, Fabric Texture\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003ePremium fabric-like texture meets engineering-grade performance,Stimulate your creative imagination\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/05_8b461fb5-b78b-47b8-9844-cb8b6acc6b36.png?v=1748061323\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/5_e8840c67-38e1-41f1-80d0-4d1b60bd7ec5.png?v=1747811829\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003cbr\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eLow water absorption\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eIt can maintain stable performance in water or humid environment and will not expand\/deform due to water absorption\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/06_66778eac-2af2-4e41-acfd-b12bc59c43d4.png?v=1748061322\" class=\"qdp_mi\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/6_ac9d5582-a6c5-48d1-b9c1-743ae5ca4b9f.png?v=1747811828\" class=\"qdp_i\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局 --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_st-tbc\"\u003e\n\u003cbr\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eAccessory Compatibility\u003c\/h3\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable style=\"width: 99.9582%;\" class=\"qdp_tb\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11.2227%;\" class=\"qdp_td\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55.3775%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003c!-- 第一行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd style=\"width: 11.2227%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55.3775%;\" class=\"qdp_td\"\u003eQIDI PEI Plate and Smooth Plate(Spray alcohol to help remove print parts), HF Plate, PC Plate\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd style=\"width: 11.2227%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55.3775%;\" class=\"qdp_td\"\u003e\n\u003cp\u003eBrass\/Copper plated Nozzle( 0.4 \/ 0.6mm )\u003c\/p\u003e\n\u003cp\u003eHardened Steel Nozzle ( 0.4 \/ 0.6mm )\u003c\/p\u003e\n\u003cp\u003eBimetal Nozzle ( 0.4 \/ 0.6mm )\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\n\u003cp\u003eBrass\/Copper plated Nozzle(0.8 mm)\u003c\/p\u003e\n\u003cp\u003eHardened Steel Nozzle (0.8 mm)\u003c\/p\u003e\n\u003cp\u003eBimetal Nozzle (0.8 mm)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c!-- 第四行 --\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd style=\"width: 11.2227%;\" class=\"qdp_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 55.3775%;\" class=\"qdp_td\"\u003eGlue Stick\u003c\/td\u003e\n\u003ctd style=\"width: 33.1161%;\" class=\"qdp_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- table布局结束 --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- table-row --\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_table-row\"\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e70-80 °C，4-6 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e\u0026lt; 15% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e230-270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e30-45 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e30-50 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003ePhysical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e0.74 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eWater absorption\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e1.09 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eVicat softening temperature\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e70.4°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eMelt index\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e8 g\/10min(190°C,2.16kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_tbc\"\u003e\n\u003ctable class=\"qdp_tb\" style=\"height: 100%;\"\u003e\n\u003c!-- 表头 --\u003e\n\u003cthead class=\"qdp_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"qdp_td\" colspan=\"2\"\u003eMechanical Properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eTensile strength(X-Y)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e4.23±0.04 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eTensile breaking strength (X-Y)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e6.81±0.11 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"qdp_tr\"\u003e\n\u003ctd class=\"qdp_td\"\u003eelongation at break (X-Y)\u003c\/td\u003e\n\u003ctd class=\"qdp_td\"\u003e576.27±8.48 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"font-size: 0.8em; margin-top: 5px; text-align: center;\"\u003eSpecimens printed under the following conditions: print temperature 250°C,Flow ratio 0.68,Nozzle size 0.4mm，Bed temp 45°C, Print speed 60mm\/s, Infill 100%, Infill angle ±45°\u003c\/div\u003e\n\u003cp class=\"qdp_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\"\u003e\n\u003ch3 class=\"qdp_t qdp_st\"\u003eDownloads\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv style=\"justify-content: center;\" class=\"qdp_p qdp_i-t-text qdp_padding-in-mobile qdp_flex-pc\"\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI UltraPA-CF25\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1YsV_yx9Gv-tBJf5bntW6aOF3FkJMrlgo\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament TDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-right: 10px; margin-left: 10px; margin-bottom: 10px; text-align: center;\"\u003e\u003ca title=\"QIDI UltraPA-CF25\" style=\"display: flex; justify-content: center; align-items: center;\" href=\"https:\/\/drive.google.com\/drive\/folders\/1g46kr0ISNWbyvv6qKpglv303Lba02c-m\" target=\"_blank\"\u003e \u003cspan class=\"qdp_pdf-icon\"\u003e \u003cimg style=\"width: 25px; margin-right: 20px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PDF.png?v=1715152119\" alt=\"pdf\"\u003e \u003c\/span\u003e \u003cstrong\u003e \u003cspan style=\"color: #000000;\"\u003e \u003cspan style=\"text-decoration: underline;\"\u003eFilament MSDS\u003c\/span\u003e \u003c\/span\u003e \u003c\/strong\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t qdp_st\"\u003ePrinting Tips\u003c\/h2\u003e\n\u003col class=\"printing-tips-list\" style=\"margin-left: 0; padding-left: 1.5em; text-align: left;\"\u003e\n\u003cli style=\"text-align: left; margin-bottom: 12px;\"\u003eTPU materials are prone to moisture absorption when exposed to air. It is recommended to put TPU-Aero filaments in a drying oven (humidity controlled below 15%) immediately after opening the vacuum foil packaging. Unused filaments should be resealed in the original foil packaging.\u003c\/li\u003e\n\u003cli style=\"text-align: left; margin-bottom: 12px;\"\u003eFor TPU-Aero filaments that are exposed to air for a long time, it is recommended to put the filaments in a 70-80°C oven for 4-6 hours before printing to avoid problems such as bubbles, holes or drawing caused by moisture.\u003c\/li\u003e\n\u003cli style=\"text-align: left; margin-bottom: 12px;\"\u003eDue to the continuous expansion of the foaming material in the hot end cavity, leakage is inevitable during the stroke movement. Even adjusting the retraction distance and speed cannot improve this situation. It is recommended to disable the retraction function in the slicing software, print only one model at a time, or use the piece-by-piece printing function, and turn on the option to avoid crossing the outer wall to reduce drawing and leakage caused by long-distance idling and jumping.\u003c\/li\u003e\n\u003cli style=\"text-align: left; margin-bottom: 12px;\"\u003eSome of PEI textured or PEI film build plates may exhibit excessive adhesion to TPU materials, making printed parts difficult to remove. It is recommended to use alcohol to remove the parts.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: left;\"\u003e\u003cbr\u003eFor more details please refer to: \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff;\" href=\"https:\/\/wiki.qidi3d.com\/en\/Memo\/Filament-Guide\" title=\"Filament drying cover\" target=\"_blank\"\u003e Filament Guide\u003c\/a\u003e\u003c\/span\u003e on WIKI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t-p\" style=\"text-align: center;\"\u003eVacuum Aluminum Foil Packaging\u003c\/h2\u003e\n\u003cp style=\"text-align: center;\" class=\"qdp_p\"\u003eAccording to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_tpc-ic\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/750_07.jpg?v=1715224683\" alt=\"TPU-Aero\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/PET-CF_08.jpg?v=1715067296\" alt=\"TPU-Aero\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003c!-- 第二部分 --\u003e\n\u003cdiv class=\"qdp_t-p\"\u003e\n\u003ch2 class=\"qdp_t\" style=\"text-align: center;\"\u003eProduct Size\u003c\/h2\u003e\n\u003cp class=\"qdp_p\" style=\"text-align: center;\"\u003eQIDI TECH TPU-Aero filament 1.75mmWorks perfectly with most FDM 3Dprinters on the market.\u003c\/p\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/tpu-aero_phone_2.png?v=1748591034\" alt=\"TPU-Aero\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/tpu-aero_2_pc.png?v=1748591035\" alt=\"TPU-Aero\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"qdp qdp_mc\"\u003e\n\u003cdiv class=\"qdp_t-icpc\" style=\"padding: 0;\"\u003e\n\u003c!-- 不同分辨率分栏数量 qdp_grad-分栏数量-设备 --\u003e \u003c!-- 替换下一行 --\u003e\n\u003cdiv class=\"qdp_icpc qdp_grad-2-pc qdp_grad-1-mobile\"\u003e\u003c!-- 第一条 --\u003e\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003cdiv class=\"qdp_ic-p\"\u003e\n\u003cdiv class=\"qdp_ic\"\u003e\n\u003c!-- 手机端图片 --\u003e \u003cimg class=\"qdp_mi\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/tpu-aero_phone.png?v=1748591033\" alt=\"TPU-Aero\"\u003e \u003c!-- PC端图片 --\u003e \u003cimg class=\"qdp_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0561\/3201\/0067\/files\/tpu-aero_pc.png?v=1748591034\" alt=\"TPU-Aero\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- 第二条 --\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Qidi Tech AU Online Shop","offers":[{"title":"White HEX Code #FFFFFF","offer_id":51894619210044,"sku":"TPU-AeroBS","price":46.99,"currency_code":"AUD","in_stock":true},{"title":"Black HEX Code #000000","offer_id":51894619144508,"sku":"TPU-AeroHS","price":49.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/9650\/7708\/files\/646b1e5eba51bbe07f5098f3a478efc1_737d35ad-7ce0-41f1-af68-9011b387dcd5.png?v=1752203577"}],"url":"https:\/\/au.qidi3d.com\/collections\/sale-filaments.oembed","provider":"QIDI AU Store","version":"1.0","type":"link"}